Shimano Side Swing front derailleurs feature improved cable routing for smooth and efficient front shifting effort and increased clearance for larger tires and shorter chainstays. - Optimal front system for internal cable routing - Enhanced maneuverability with plus-sized tires - Increased shifting efficiency and light and smooth operation force - D, E, M type mounts are available - M type mount requires 34.9mm adapter

The Shimano GRX RX815 Di2 front derailleur delivers quick and smooth front shifting even under high pedaling torque. It's designed for a wider, 17T front chainring range, has programmed chain guide trim settings, and can be used in full or semi Shimano Synchronized Shift modes. - Chainline +2.5 mm vs. conventional road FD - Wide, 17T front range chainring range - Wider tire clearance

Shimano XT FD-M8070 Di2 Front Derailleurs - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Increased power vs. mechanical - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Series : Shimano Deore XT - Swing Action: Down Swing - Top Gear Teeth: 38-34T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 134 grams

Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams

Combining Shimano's Di2 platform and the road incarnation of Hyperglide+, the Ultegra FD-R8150 front derailleur shifts between chainrings with the fast and seamless action. - Small, sleek and lightweight front derailleur - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-54t - 61-66 degree chainstay angle - Includes 1 SD300 port

- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Race Endurance For Less Damage In Crush - Quick And Smooth Front Shifting "Under" High Pedaling Torque - Maintains Compact And Smooth Appearance - Top Gear Teeth: 46-55T - Chain Stay Angle: 61-66° - Chain Line: 43.5mm

Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting. - Fast Di2 shifting performance - Smaller, sleeker, lighter - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-55t - 61-66 degree chainstay angle - Includes 1 SD300 port

SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.

SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.

SRAM's Rival 22 Front Derailleur delivers precision shifting with YAW technology. The steel cage with aluminum links ensures strength and durability. • Yaw cage rotates in line with chain, improving the shifting speed and precision while eliminating the need for shifter trim • Integrated chain spotter protects your frame, installs and adjusts independently of the derailleur itself • Precision alignment markings on the cage • Clamp: braze-on • Weight: 89g with Chain Spotter

SRAM's Force 22 Front Derailleur gives you the freedom to shift with incredible speed into either chainring. Experience precision shifting with YAW technology that allows the cage to rotate to better align with the chain and eliminates the need for shifter trim. An integrated chain spotter is included for seriously bumpy roads and cyclocross action. Paired with SRAM's X Glide R chainrings, unmatched front shifting will be the norm on your bike.

The SRAM RED front derailleur, thanks to Yaw technology, changes everything, eliminating the need for shifter trim. Instead of simply moving back and forth, the derailleur cage actually rotates to maintain a consistent angular relationship with the chain. As a result, shifts feel more direct and precise. Combined with the SRAM RED crankset and X-GlideR chainrings, it delivers an unmatched performance advantage in front shifting. - SRAM Road 11-speed compatible - Yaw Technology - Slim spring design eliminates frame interference - Optimized for shifting with X-GlideR chainrings - Precision install markings - Integrated chain spotter protects your frame without adding any extra clunk and adjusts independently of the derailleur itself - Speeds: 2x11 - Material: Aluminum outer cage, Tool steel inner cage, Composite tail - Weight: 69g (braze-on), Chain spotter: 10.2 grams - Outer Cage: Aluminum - Compatibility: SRAM RED 22 & Force 22 Front Shift-Brake levers & X-GlideR Chainrings, SRAM R2C Aero SL-1190 shifters, SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Inner Cage: Tool steel

The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included

The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included

The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations - Compatible with existing eTap batteries

• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

• Converts direct mount front derailleurs to clamp on • Lightweight alloy • Fits 68/73mm and 100mm bottom brackets • 34.9mm clamp

Mezzo front derailleurs offer durable construction and seamless compatibility with existing systems, making repairs and upgrades easy. - Aluminum bracket, plastic body - Includes 31.8mm clamp adapter

Featuring full metal construction and precisely engineered linkages, Marvo level derailleurs deliver high end performance that will last.

R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.

R10 front derailleurs work with 10-speed Shimano-compatible road shifters. Designed to work with a variety of chainring combinations, these workhorse components will get you rolling again. - Cold-forged aluminum body

Centos front derailleurs are precisely manufactured for responsive, accurate shifting under race conditions. - Compatible with Shimano Tiagra 4700 10-speed road systems - Includes adapter for 31.8 and 28.6mm seat tubes

- Cover up those unfinished and unused FD mounts with MRP cover plates - Offered in Decapitator version with built-in bottle opener - Alloy with matching alloy fastener, 12g - Made in Grand Junction, CO USA

- Replacement backplates for MRP chainguides - Medium angle backplate models offer clearance for low chainstay frames such as VPP

The K-Edge Road Clamp Chain Catcher functions the same as the original chain catcher, but it mounts to its own CNC sculpted lightweight clamp. K-Edge's Road Clamp-on Chain Catcher improves overall function of your drive train while protecting your valuable frame from a dropped chain. - Prevents missed front shifts and frame damage from a dropped chain - For use with clamp-on front derailleurs - Clamps below and adjusts independently of the front derailleur - Precision machined, anodized 6061 T6 aluminum - 23 grams

Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

K-Edge Cross Single adds additional protection to a single ring set-up by preventing the chain from jumping up or off the ring. - Eliminate chain-drop due to rough terrain - For use with single chainring cranksets - Clamps and adjusts independent of front derailleur - Chain catcher pad is shaped to allow for 'bottom' chain derailment without chain drop when back pedaling is necessary for foot adjustment and will re-align the chain when forward pedaling is resumed - Use with a chainring guard for maximum chain control - Compatible with framesets that allow for a 'low' mounting position (minimum of 53.2 mm from the bottom of the cross clamp to the center axis of the crank spindle is required for a 32T chainring)

- Adapts braze-on front derailleurs to fit on frames without braze-on mount - Hinged clamp

Campagnolo's Veloce Front Derailleur features an aluminum body and chrome-plated cage for low weight, durability and smooth shifting. And, it's compatible with both standard and compact cranks.