Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Cables

$1.00
- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends
$3.36
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length
$3.40
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - 2000mm length
$3.50
- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike
$3.99
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - 2000mm length
$5.54
- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - 1700mm length
$5.76
- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter
$6.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 2000mm
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses
$7.39
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses
$7.99
- Thermally bonded PTFE-coated slick galvanized cable for minimal friction - 1700mm
$7.99
- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses - Save 50% or more when you buy in the 100pc shop dispenser filebox
$11.90 - $16.34
- Slotted aluminum barrel adjuster with backing nut for common brake levers
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$5.99
- Pre-stretched Teflon coated 19 strand inner wire - new packaging
$5.99
- Pre-stretched Teflon coated 19 strand inner wire
$5.99
- Pre-stretched, stainless 19 strand inner wire - Slick profile for smooth performance
$5.99
- Pre-stretched stainless 19-strand inner wire - Slick profile for smooth performance - New Packaging
$5.99
- Pre-stretched, stainless 19 strand inner wire - Slick profile for smooth performance - Cable only, housing sold separately
$24.99
- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Prestretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included - SRAM and Shimano compatible
$24.99
- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Pre-stretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included - SRAM and Shimano compatible - Cable diameter: 1.5mm - Casing diameter: 5mm
$7.99
Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Slick Coated - Inner Cable 2100mm - (2) 1.8mm Cable End Crimps COMPATIBILITY - Works with 11, 9, 7, 8, 12, and 10 speeds - Weight: 14.6 grams
$14.99
Want the best combination of braking power and cable strength? Box Two Linear Brake Cable Kits start with custom housing that includes stainless steel mesh-wrapped linear wires for The inner cable wires are stainless steel, so they won’t rust over time. Each cable kit includes 63 inches of Linear housing, a BMX-race specific stainless steel cable wire, two black brass ferrules, and two black alloy cable end caps. FEATURES - 63 inches of Linear housing - BMX-race specific stainless steel cable wire - Two black brass ferrules - Two black alloy cable end caps - Stainless steel cable wires SPECIFICATIONS - Weight: 24 grams / 0.84 ounces
$24.99
Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag. Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps. Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.
$24.99
Our Box One Shift Cable & Housing Kit is the easiest way to get silky smooth and consistent shifts on any drivetrain. Replace your Box One, Box Two, Shimano and SRAM kit, or upgrade your Box Three or Box Four set-up. This kit is a combination of our best performing Cable Housing and Slick Coated Stainless Steel inner cable. In lab tests this combination has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Inner Cable 2100mm - Our Best Performing Housing - 4mm Housing 2000mm - Prepared with silicone grease - (2) 1.8mm Cable End Crimps - (3) 4mm Sealed Short Ferrules COMPATIBILITY - Works with 12, 11, 10, 9, and 8 speeds. - Weight: 84.3 grams
$14.99
- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB
$18.79
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm
$18.79
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm
$18.79
- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm
$69.99
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
$24.99
380mm long, single-ended straddle for mountain cantilever brakes
$3.99
- 1.5mm x 1700mm advanced die-drawn stainless steel cable is low friction with minimal elongation for smooth and responsive braking performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Compatible with all cable-actuated road bike brake systems - Compatible with all high-performance outer casing, lubricants, and end caps
$3.99
- 1.1mm x 2100mm advanced die-drawn stainless steel cable is low friction with minimal elongation for consistently effortless shifting performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Recommended for 10-speed drivetrains - Compatible with all high-performance outer casing, lubricants, and end caps
$19.99
- High-performance compressionless outer casing designed for precise and effortless shifting - A fully lubricated inner housing liner reduces friction and enhances lever feel - Stainless steel low friction inner cable - Recommended for 10-speed drivetrains - 10-speed or less shifting system recommended - Compatible with Shimano® and SRAM® shifting systems Includes: 2 x Sealed End Cap, Alloy/Black 8 x Open End Cap, Alloy/Black 6 x Cable Oring, Translucent (2 sets = 6pcs) 2 x Frame Protector, Mini Black 2 x Cable Tip, 1.2mm, Alloy/Silver
$2.00
- Aluminum straddle cable carrier for cantilever brake
$25.90
- Dispenser of rubber cable O's
$35.00
- Dispenser of chromed ferrules - 5mm
$6.99
- Extra long cable length - Road and MTB brake cable ends - 1.6mm x 1900mm
$3.95
- Stainless steel top tube cable clamp. 4g each
$17.00
- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Double ended for Shimano/SRAM road and MTB brake levers - Pre-stretched for more responsive braking - 1.5mm x 1700mm
$53.00
- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Compressionless linear strand housing with slick lube liner for reduced friction - Lightweight sealed alloy end caps and alloy cable tips - Compatible with Shimano/SRAM road and MTB shifters Contents: - 1x - 1.1mm x 1500mm cable - 1x - 1.1mm x 2300mm cable - 2.7m - Compression-less 4mm housing - 8x - Black sealed alloy end caps - 2x - Black dirt guard alloy end caps w/ rubber boots - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks
$53.00
- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Kevlar reinforced compressionless linear strand housing with slick lube liner improves lever feel - Lightweight alloy end caps and cable tips - Compatible with Shimano/SRAM road and MTB brake levers Contents: - 1x - 1.5mm x 1350mm cable - 1x - 1.5mm x 2350mm cable - 3m - Compression-less 5mm housing - 2x - EZ-bend housing segments - 6x - Black alloy end caps - 2x - Black alloy end caps for small frame fittings - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks
$12.66
Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar
$36.00 - $46.00
Hose kits for Hayes hydraulic disc brakes include stiff, durable hose and the necessary fittings.
$46.99
K2 Hydraulic Hose Kit for Dominion Prime Stroker and El Camino Hayes proprietary hose kit is reinforced with Kevlar for strength and durability. Kit includes: 200cm rear hose and all fittings.
$29.99
Machined aluminum adjusters offer precise, ergonomic cable adjustments. - Quick release downtube cable housing stops allow easy lubrication of shift housing - Includes barrel adjusters and mounting bolts
$3.00 - $4.00
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
$3.00
Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm
$3.00
Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm
$4.00
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation
$4.49 - $5.99
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
$4.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm
$4.99 - $11.99 $4.99 - $11.99 Up to 20% Off
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$5.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake - Black
$5.99
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm
$5.99 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$6.00
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$6.99 - $50.00
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$6.99
Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces
Page 1 of 5 Next page