Well, what´s to say about our DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 445mm and 125mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to work perfectly with the shorter travel. - Infinite adjust, 125mm travel - Total overall length: 445mm - But can be easily cut to as short as 375mm - Titanium saddle bolts - Tapered lower tube - Compatible with oval and carbon saddle rails - Sub-zero temperature functionality - Fully user serviceable - 450g Sold as seatpost only—Remote/Trigger's are sold separately.

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

The REVIVE MAX 213 follows her slimmer sister and now comes as a 2.0 version with 213mm of infinitely adjustable travel. With the release of the REVIVE 2.0, the extra-long 213mm post required a lot of re-thinking for the whole chassis structure. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strength and stiffness at the same time. - Updated one-piece 3D forged upper tube design for increased stiffness - New CNC actuator lever provides even smoother action - The patented Reset Valve function easily bleeds/resets your "springy" post in just a few seconds - Low friction and super smooth movement, due to less seals and it's non-IFP design - Sub-zero temperature functionality - Short overall length; 213mm post is 582mm long - Compatible with oval and carbon saddle rails - Rotatable foot for extra clearance inside the seat-tube - Fully user serviceable - 690g Sold as seatpost only—Remote/Trigger's are sold separately.

Comfort was at the forefront of our mind when we started developing The Cloud MK2 Seat. We wanted a saddle that offered comfort and resilient support for week long Enduro events. - Dimensions: 132mm x 275mm - CR-MO rails, moulded plastic base - Weight: 270g

Comfort was at the forefront of our mind when we started developing The Cloud MK2 Seat. We wanted a saddle that offered comfort and resilient support for week long Enduro events. - Dimensions: 132mm x 275mm - Titanium rails, carbon base - Weight: 235g

The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core

- Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction - Front and Rear application

- Lighter and faster than the original - Control and predictability of the original but with less rolling resistance and weight - Front and Rear application

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

- Comfortable ride - Classic colors

- Comfort in an affordable first-class saddle. - Padded with Slow Fit Foam, a memory foam that molds to rider's body. - The foam matrix open cell structure confers increased elasticity and breathability to guarantee a durable and comfortable saddle - Integrated Clip System (ICS)

- Lightweight Design - Steel rings with engineering polymer spacers - Nickel finish - 8 Speed compatible - Weight—346g

- 8 speed wide range - 11-40t - Steel spider

- 9 speed wide range - 11-40t - Steel spider

- 10 Speed wide ratio cassette - Alloy spiders - Steel lockring - Fits Shimano/SRAM freehub - 448g (11-42); 414g (11-40)

- Steel cogs - Composite spacers

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

Hope Brake Lever Parts

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

- 3-spline steel cogs for use with Sturmey 8-speed internal gear rear hubs - Flat or dished for tuning chainline. Chrome plated

- Crank dust cap - Works with most three-piece crank models

- Chrome - Sold individually

- Sunlite Cottered Pins

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

FSA Standard Headset Bearings

• Compatible with most side pull and center pull brakes • All weather compound

- Replacement Rotor Bolt kits for Formula rotors - 6/pack

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

Disc Brake Adapters

Brass compression olive for Hope hydraulic disc brakes.

Brass hose insert for Hope hydraulic disc brakes.

- Replacement barrel adjuster for 105 5800 brakes

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design

- 40mm long brake blocks with hardware to fit basic caliper brakes

Hope 5mm Standard Hose Kit with Fittings for Hope Brake

Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.

- 0.9mm Wall thickness - 700 x 18-25C = 27 x 1 - 700 x 28-35C = 27 x 1-1/8, 1-1/4 - Compliant with California Proposition 65

Our mountain rim brake pads are available both with a threaded or smooth post.

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

- Machined aluminum spacers for tuning stem height - Black spacers with white FSA graphic - 5mm and 10mm Spacers are sold individually - 1-1/8" Spacer Kit includes: (3) 3mm, (4) 5mm, (3) 10mm, (2) 20mm

- Enough clamp bolts for 4 clamps

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Shimano Dura-Ace R9100 Cassette Spacers