Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Components

Burgtec Penthouse MK5 Flat Pedal
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
Burgtec Ride Wide Carbon DH
As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control. - Uni-Directional Carbon - 800mm width - 9 degree backsweep - 4 degree upsweep - Suggested cut down marks - Weight: 280g
Burgtec The Bartender Pro Greg Minnaar Signature Grip
"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On
Kenda Juggernaut
- All conditions Fat Bike tread
Kind Shock LEV
- LEV has always represented the latest technology but is already a classic among top contending dropper posts. - With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.
Kind Shock eTen i
- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.
SunRace MFM2A
- Black polymer spacers - Multiple speed options available
SunRace MFM300
- Steel cogs - Composite spacers
Hope Hope X2 M4 V2 Mono Moto Pad Disc Brake Pads Clip
$0.40
Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes
Hope 6mm Copper Seal Washer (Bag of 10)
$0.99
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Hayes Bleed Kit Adapter
$1.05 - $2.75
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.70
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Sunlite Crank Dust Cap
$1.99 - $2.39
- Crank dust cap - Works with most three-piece crank models
Sunlite Hex Head Seat Binder Bolt and Nut
$1.99
- Chrome - Sold individually
Hayes Caliper Rebuild Parts
$2.00 - $40.00
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
RaceFace Alloy Crank Spindle Spacer
$2.00
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
RaceFace EXI Crank Bolt Puller Cap Washer
$2.00
Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt
Sturmey-Archer 3-Speed Sprocket And Circlip
$2.00 - $5.00
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
Sturmey-Archer 8-Speed Sprocket And Circlip
$2.00
- 3-spline steel cogs for use with Sturmey 8-speed internal gear rear hubs - Flat or dished for tuning chainline. Chrome plated
Sunlite Cottered Pin
$2.49
- Sunlite Cottered Pins
Origin8 Rubber End Plugs
$2.79 - $3.19
Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.
Lizard Skins 5mm Grip Donut
$2.99
Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.
Sunlite X-Cut Brake Pads
$2.99
• Compatible with most side pull and center pull brakes • All weather compound
Sunlite Cantilever Shoe Eye Bolt
$3.19
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
Formula Rotor Bolt Kits
$3.50 - $51.50
- Replacement Rotor Bolt kits for Formula rotors - 6/pack
Kool-Stop Thinline Brake Pad Hardware Kit
$3.69
- Low profile - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Knurl-lock washer system
Sunlite Brake Pivot Bolt
$3.79
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
Wheels Manufacturing Pedal Washer
$3.95
- Protects cranks from damage caused by overtightening pedals - Can be used for bike fit adjustments, dependent on pedal thread length engagement
Odyssey 6 Piece Stem Bolt Set
$3.99
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
Page 1 of 221 Next page