- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+

- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+

RockShox, 11.4118.038.001, Service kit, Monarch XX B1 2014+

This suspension fluid is recommended by RockShox for shock rebuilds. - 15W 50 - 1L bottle

This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

RockShox 30mm Seal Kit

RockShox Volume Reducer Kits

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Charger RL Sealhead) Sid 35Mm Select C1 (2021)

200 HOUR/1 YEAR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, IFP SEALS, SEAL GREASE/OIL) - SIDLUXE A1 (2020)

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Charger 2 RLC Sealhead) - Sid RLC A1+ (2017-2019)/Ultimate B4 (2020)

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

Maxima Serene Seat Post Fluid, for use in servicing Reverb Seat Post. - Not for use in Remote

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

Rear Shock IFP Height Tool (for setting IFP Height) - SuperDeluxe/Super Deluxe Coil A1+ (2018+)

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives

Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits

- Made from laser cut tool steel heat-treated for strength and lasting performance - New design features 24mm socket driver for use with Pedro's professional socket tools - 290mm length and ergonomic shape provide excellent leverage and comfort - Smaller lightweight design perfect for travel and the toolbox Pulling inspiration from our shop wrenches and using the same laser-cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and now doubles as a socket driver for use with Pedro's professional socket tools. Features include a long 290mm length, cushioned plastic grip for control and comfort, heat-treated tool steel construction for strength and lasting performance, new 24mm socket driver, and a precision-cut 15mm wrench opening positioned at a 30 degree offset to improve mechanical advantage and wrench positioning. The smaller, lightweight, 215g design is perfect for travel and easy to fit in the toolbox.

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.